Arca
Skip to content

AVT06: Complete Response Letter

A complete response letter is FDA's decision not to approve an application as submitted. See BLA 761435's history or Alvotech USA's company page.

On Nov 24, 2025, FDA declined to approve AVT06 (BLA 761435) from Alvotech USA Inc. in its present form, citing facility inspections. openFDA lists it as not yet approved.

  • Letter date: Nov 24, 2025
  • Application: BLA 761435
  • Since then: Not approved

What FDA Cited

FDA's own section headings in the letter; each finds other letters citing it

Facility inspections

The Letter

Text from openFDA; FDA's scanned original (PDF) ↗

Dear Anusha Kesireddy:

Please refer to your biologics license application (BLA) ee, for AVT06.

We have completed our review of this application, as amended, and have determined that we cannot approve this application in its present form. We have described our reasons for this action below and, where possible, our recommendations to address these issues.

FACILITY INSPECTIONS

1. Following pre-approval/pre-license inspection of , listed in this application, FDA conveyed deficiencies to the representative of the facility. The facility should provide satisfactory responses to these deficiencies to the FDA office indicated on the FDA 483 prior to your complete response to your application. Your complete response should include the date(s) of the facility's response to the FDA Form 483. The assessment of application approvability and the resolution of inspection deficiencies would be evaluated upon receipt of the complete response and may include re-inspection of the facility. Please work with the facility in resolving the related deficiencies.

(b) (4)

2. As part of the facility evaluation of Pe, , a Remote

Regulatory Assessment was performed. FDA identified deficiencies that were conveyed to the representative of the facility. The facility should provide satisfactory responses to these deficiencies to the FDA office that conducted the Remote Regulatory Assessment prior to your complete response to this letter. Your complete response should include the date(s) of the facility's correspondence(s) to address these deficiencies. FDA may need to perform an onsite PLI before this application may be approved. Please be aware that we will not initiate the PLI until your complete response is received. Please work with the facility to resolve the related deficiencies and ensure the facility is ready fora PLI.

PRESCRIBING INFORMATION

Submit draft labeling that is responsive to our electronic communication dated (b) (4)

Prior to resubmitting the labeling, use the SRPI checklist to correct any formatting errors to ensure conformance with the format items in regulations and guidances. In addition, submit updated content of labeling [21 CFR 601.14(b)] in structured product labeling (SPL) format as described at FDA.gov.'

To facilitate review of your submission, provide a highlighted or marked-up copy that shows all changes, as well as a clean Word version. The marked-up copy should include annotations that support any proposed changes.

Your proposed Prescribing Information (Pl) must conform to the content and format regulations found at 21 CFR 201.56(a) and (d) and 201.57. As you develop your proposed PI, we encourage you to review the labeling review resources on the Prescription Drug Labeling Resources? and Pregnancy and Lactation Labeling Final Rule? websites, which include:

e The Final Rule (Physician Labeling Rule) on the content and format of the PI for human drug and biological products e The Final Rule (Pregnancy and Lactation Labeling Rule) on the content and format of information in the PI on pregnancy, lactation, and females and males of reproductive potential e Regulations and related guidance documents e Asample tool illustrating the format for Highlights and Contents, and e The Selected Requirements for Prescribing Information (SRPI) - a checklist of important format items from labeling regulations and guidances.

e FDA's established pharmacologic class (EPC) text phrases for inclusion in the Highlights Indications and Usage heading.

e Additional resources for the PI, patient labeling, and carton/container labeling.

In addition, we encourage you to review the draft guidance for industry Labeling for Biosimilar Products.

1 http://www.fda.gov/Forlndustry/DataStandards/StructuredProductLabeling/default.htm

2 https://www.fda.gov/drugs/laws-acts-and-rules/prescription-drug-labeling-resources

3 https://www.fda.gov/drugs/labeling-information-drug-products/pregnancy-and-lactation-labeling-drugs- final-rule

U.S. Food and Drug Administration Silver Spring, MD 20993 www.fda.gov

CARTON AND CONTAINER LABELING

Submit draft carton and container labeling based on our proposed revisions dated (b) (4)

PROPRIETARY NAME

Please refer to our correspondence dated, , which addresses the proposed proprietary name, |). This name was found conditionally acceptable pending approval of the application in the current review cycle. Please resubmit the proposed proprietary name when you respond to all of the application deficiencies that have been identified in this letter.

(b) (4)

SAFETY UPDATE

When you respond to the above deficiencies, include a safety update. The safety update should include data from all nonclinical and clinical studies of the product under consideration regardless of indication, dosage form, or dose level.

OTHER

Within one year after the date of this letter, you are required to resubmit or take other actions available under 21 CFR 601.3(b)). If you do not take one of these actions, we may consider your lack of response a request to withdraw the application under

21 CFR 601.3(c). You may also request an extension of time in which to resubmit the application.

A resubmission must fully address all the deficiencies listed in this letter and should be clearly marked with "RESUBMISSION' in large font, bolded type at the beginning of the cover letter of the submission. The cover letter should clearly state that you consider this resubmission a complete response to the deficiencies outlined in this letter. A partial response to this letter will not be processed as a resubmission and will not start a new review cycle.

You may request a meeting or teleconference with us to discuss what steps you need to take before the application may be approved. If you wish to have such a meeting, submit your meeting request as described in the draft guidance for industry Formal Meetings Between the FDA and Sponsors or Applicants of BsUFA Products.

The product may not be legally marketed until you have been notified in writing that this application is approved.

U.S. Food and Drug Administration Silver Spring, MD 20993 www.fda.gov

If you have any questions, contact

Sincerely,

{See appended electronic signature page}

Center for Drug Evaluation and Research

U.S. Food and Drug Administration Silver Spring, MD 20993 www.fda.gov

Signature Page 1 of 1

This is a representation of an electronic record that was signed electronically. Following this are manifestations of any and all electronic signatures for this electronic record.

wa 11/24/2025 03:11:25 PM

Alvotech USA's Other Letters

Newest first
  • AVTO5Nov 26, 2025 · BLA 761461 · not approved
  • AVTO5Oct 31, 2025 · BLA 761462 · not approved
  • AVT04Oct 11, 2023 · BLA 761343 · later approved
  • AVTO2Jun 28, 2023 · BLA 761299 · later approved
  • AVT02Dec 20, 2022 · BLA 761299 · later approved

Record

Company
Alvotech USA Inc.
Application
BLA 761435
Status in openFDA
Unapproved

FDA has published complete response letters since 2025, with some redactions. The status is openFDA's: whether the application was eventually approved. openFDA complete response letters

Logos are each company's own site icon, matched by name through Wikidata.Company names and logos identify the companies in public FDA and registry records and do not imply endorsement.